Echo dot wall mount / holder.
So "Why?" I hear you ask.. "Why another Echo dot wall mount?"
I printed some of the other great designs from Thingiverse and none of them had what I wanted or bits I didn't like. So I started from scratch.
This wall holder has the following features

• It is easy to remove and clip the dot into place. It does not rely of a friction fit, it clips in place using the small edge near where the power cord goes in. It is sturdy yet my 5 year old son can easily remove and re-mount it.
• It is the right way up! Many of the solutions have the wire pointed down which means the echo dot is upside down. By mounting the dot with the cable going up BUT adding features to hide the cable you keep it neat you, get the same function and it is the right way up.
• It does not cover it up. Some solutions have a little lip that covers up the dot's cool blue ring.

I have added 2 models. One with the tab (V4) and one which has been cut back to the minimum material (V5). The V5 would also allow you to un-mount the dot without unplugging it!

NOTE: Any branding has been removed from the model

TRONXZ X5S

No

No

0.3

20%

Print on its side