NOTE: All technology rights to design of the crossover network supplied by GR-Research owned by GR-Research. I have no rights to the design, other than as an end user, and I have no intention of distributing that intellectual property.

This is an original design, allowing the builder to easily mount the kit from GR-Research as a DIY project. I cannot, and will not, explain or provide documentation on the components used, or how the crossover is wired.

https://www.gr-research.com/store/p103/%22The_Mini%22.html

There are two files, a base, and a frame. The frame allows the base to sit above the speaker mounting surface, allowing space for wiring under the base. Should be mounted to the cabinet with 3x 1/4" wood screws.

NOTE: As suggested by Danny Richie, of GR-Research, I have changed the angle of the small inductor to be at a 90° angle to the large inductor. Apparently, it makes a difference in the sound.

Prusa

I3 MK3S

No

No

200

38

Feel free to use in any way you may wish. Crossover network designed by GR-Research, and any property rights associated with that design are owned by them.