Weather-proof cover for Loxone NFC Code Touch keypad. This cover is designed to protect the device from rain and snow. It has a simple, minimalistic, and functional aesthetic. It is designed to slide directly onto the keypad. No screwing to the surface.

The cover features several smart design elements:

• Sloped Roof: A slight incline to effectively drain water away.

• Drip Edges: Integrated channels below the roof and at the bottom to prevent water from running back under the cover.

• Ventilation: A bottom-facing vent to prevent moisture buildup.

• Anti-Theft Protection: The snug fit makes it significantly harder to remove the keypad. To remove the cover safely, I recommend using pliers to avoid damaging the wall surface or the keypad itself.

• Rounded Corners: A sleek, modern finish that complements the device.

There are two versions of the cover:

• Tight Fit (inner width 90.2 mm): Ideal for a secure, friction-fit installation without adhesives.

• Loose Fit (inner width 90.4 mm): Recommended if you plan to use a silicone or PU sealant for a permanent, waterproof bond.

Orient the cover face-down on the print bed to minimize warping. This ensures the back side remains perfectly flat, providing a tight seal to prevent water ingress. I recommend PETG filament, standard supports and a brim.