This is a clean, modern Couple Heart Desk Decoration designed in Fusion 360.

The design consists of two parts:

1. Couple Interlocking Heart – can stand on its own

2. Optional Display Base – press-fit (snug fit), no glue needed

The base is not mandatory, but it improves stability and gives a more finished, professional look on your desk, shelf, or bedside table.

The model is optimized for easy printing:

• No supports required

• No glue required

• Beginner-friendly

• Prints cleanly in PLA

Great as:

• Valentine’s gift

• Anniversary decor

• Couple desk ornament

• Minimal home decor piece

🖨 PRINT SETTINGS (Recommended)

Material: PLA (PLA+, Silk PLA, or Matte PLA works great)
Supports: ❌ Not needed
Assembly: ✅ Press-fit (no glue)
Skill Level: Beginner

Suggested slicer settings:

• Layer height: 0.2 mm

• Walls: 2–3

• Infill: 10–15%

• Brim: Optional (if bed adhesion is weak)

Fit note (optional):
If the base feels too tight, scale the heart to 99.8–99.9% or lightly sand the feet.

🧩 ASSEMBLY INSTRUCTIONS

1. Print both parts: Couple Heart + Base (optional)

2. Align the heart feet with the slots in the base

3. Press down gently until fully seated

4. Enjoy your display!

(You can also display the heart without the base.)