3D MODEL DESCRIPTION Support for mounting your Graphic card outside the cabinet for mining, exhibition, ventilation or space purposes. Both Graphic card and Riser are supported on a flat surface, allowing the use of screws for a more complete fixation (list of screws below). This avoids the long-term consequences of 24/7 vibrations: heating of the contact region and even fire. You can assemble the GPU on horizontal or vertical axis, using it on the table, walls, cabinet wall, … Perfect GPU fitting, requiring just one M3,5 screw. Built for different GPU sizes, with 1, 2 or 3 fans. Designed to be printed in either PLA or ABS. No support required. Please feel free to share the images of your print in your setup, that would be great! List of screws: -> Fixing the graphic card: 1x M3.5-12mm -> Fixing the riser support to the main support: 4x M3.5x12mm -> Fixing the Risers on the support: 4x M3x16mm (screw/nut set) 3D PRINTING SETTINGS Dimensions(mm): 95 x 180 x 133 Layer heigh: 0,2mm Walls: 2 Infill: 15% Material: PLA or ABS No support required. Base speed: 50mm/s Printing time: ~10h