Just a split elephant remix for easier printing without support. Scale up to the size you want. I printed it at 500%. I used acetone to attach the halves. I printed mine without a bottom shell and 12% infill.Print Settings Printer: Mendelmax 1.5 Rafts: No Supports: No Resolution: .12 Infill: 12%Notes: I printed it with 3 parameters (shells) @ .5mm width (1.5mm total wall thickness). I Used PLA with additives that react to acetone.Post-PrintingAttach the two halves with the glue of your choice. Use an opaque color for best results.  Original Model by: purita  (http://www.thingiverse.com/thing:918221)