spacer caddx
MelissaStern
Найти похожую с ИИ
Профиль печати(0)
Файл модели(0)
0
0
0
Опубликовано:2025-10-19 07:58:05
0
0
000Описание
Источник модели
Отзывы(0)
This is a mounting plate / spacer designed specifically for the Caddx Vista digital FPV system. The holes at the corners are intended to align with your drone frame's standoffs, providing a flat and secure surface to mount the Vista unit.
It can be used as a top plate, an adapter if your frame's mounting holes don't align, or as a simple spacer to create more vertical room in your stack. This is an essential part for a clean and secure installation of your digital FPV system.
Features:
Designed for mounting the Caddx Vista.
Aligns with standard standoff spacing (specify size if known, e.g., 30x30 or 20x20).
Flat design for a fast and easy print.
Ideal for organizing your stack and protecting the Vista.
⚙️ Recommended Print Settings:
Material: PLA+, PETG, or ABS/ASA. These materials offer excellent rigidity. TPU is not recommended as the plate needs to be stiff.
Layer Height: 0.2mm
Infill: 30-50%. If it needs to support weight (e.g., a battery on top), increase to 80-100%.
Walls/Perimeters: 3-4 for good strength.
Supports: None required. Prints perfectly flat.
Orientation: Print flat on the build plate.
Источник модели
Оригинальная ссылка: Посмотреть детали
CC BY