Notes on printing and parameters

1. No brims or supports are needed.
2. Infill=20% (not required) will help the top print smoother with little impact to print time.
3. .
4. Printers usually default to a thicker bottom layer. (ie: 0.3 mm first layer, and all other layers are 0.2 mm)
5. Take this into account when setting the "Bottom Gap" for the seam, and "Bottom Depth" for the bottom text.
6. .
7. "Embossed letters" were created with a filament change to a different color.
8. IE: Black filament for the box, and white filament for the top and bottom couple of layers.