This is just a remix of the original by Stefan_schmid91. I just added the layer color changes under the objects tab. I also got rid of the eight colors that Stefan originally had lowering it to only 4. He didn't use the other colors. They were just there making it harder to use the four colors from my AMS lite.

Now you should be able to load, select the colors in the correct order from your AMS, slice and print.

Order as below:

Black, Blue, Green, White.

For my picture of the print, I shrunk the size a little to better fit my situation. If you want to do the same just keep uniform scale checked and change to size you need. Then uncheck uniform scale and change the Z scale back to 100%.

Have Fun.

From original description:

Nice Print of Yoshi.

AMS with Generic PLA from 3DJake -Green, White, Blue, Black

Start with black

at Layer #8 change to Blue (0.72 mm)

at Layer #13 change to Green (1.12 mm)

at Layer #19 change to White (1.60 mm)