Gridfinity storage for the DSPIAE Reciprocating Sander. I have been working on updating my hobby storage and wanted a better storage option for my sander and the additional heads/sanding sheets.

Design goals were as follows:

• Can store the sander, 2x of each head
• Store sandpaper vertically/separated by grit (including all grit that they sell, 8 slots for the 2 varieties of sand paper sheets)
• Fit in short drawers of Ikea ALEX

I also wanted to use the grit labels that came with the sandpaper. I didn't do a great job on this one as there isn't quite enough space on the sides for labels in the rounder corners, but its good enough for now. I may update the model later to better space them and at a small recess for the included labels.

Sandpaper holder is 5x1, Sander holder is 5x2. I decided to forgo magnets as I didn't need them and it makes printing simpler. I used settings I use for all Gridfinity boxes, big updates as follows:

• 2 walls
• Arachne walls, inner/outer/inner walls
• 3 top/bottom layers, 0mm top/bottom thickness
• 10% infill Grid
• No supports

Designed in Onshape, file is here: https://cad.onshape.com/documents/60abee5e1697dfc40088a663/w/b89fb3a9d8e3939cd5e27049/e/29c4c20e485ee678e867a71b