Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm

The Model is 200x97.96mm in size
You may print at higher layer heights below the Min Depth of 0.52mm
The Max Depth is 2.3mm and the Actual Depth is 2.3mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.68mm) swap to Red
At layer #12 (1.08mm) swap to Beige
At layer #22 (1.88mm) swap to Jade White for the rest.