This installation bracket can fix the E3D hot end to the Anet A6 sliding frame. To do this, just use the original screws at the bottom of the sliding frame and combine them with the M6×30 pipe embedded at the bottom to complete the installation.

Advantages: You don't need to redesign the entire X-axis slide frame, and you can quickly and easily use the E3D Titan hot end for printing.
Disadvantage: It will slightly reduce the printing height.

Installation steps: First, unscrew the screws at the bottom of the X-axis slide frame and remove the old heat end, but leave the M6 throat pipe with the nut in place. Remove the pipe joint from the E3D heat end and insert the M10-M6 adapter into it. Tighten the heat end onto the M6 bolt, then install the mounting plate