Summary

This is case for the Commodore 64 SD2IEC (user port edition) creation on PCBWay
https://www.pcbway.com/project/shareproject/SD2iEC_COMMODORE_64_DISK_DRIVE_EMULATOR_POWERED_from_USER_PORT_MICRO_SD_VERSI_c56a9f83.html

It is a pretty simple design and can be easily printed as the bottom has no overhangs that need supports and the top has minimal support for the edges required.

Three No.4 x 1/4" (2.9mm x 6.3mm) screw are needed to secure the pcb to the bottom are required.