Use this spacer in conjunction with a a c-shape Magsafe ring to turn your Qi charger into a Magsafe/Qi 2 charger!

Build (In sandwich order)

• A c-Shape Magsafe ring. 
  • Can buy this for cheap off Amazon/Ebay/Temu/Aliexpress.
  • Must be c-shaped to prevent tripping the QI charger's induction detection. Do not get an o-shaped ring!
• The 3D print!
  • The depth of the spacer is 3mm. You may need to extrude it even more to accommodate larger camera bumps. (You can do this in your slicer!)
    • 3mm works well on my iPhone 15 pro with an ESR case.
    • Without the case, the camera bump does lightly touch the bottom surface as it's bigger than 3mm.
• Adhesive of your choice to adhere the print to your Qi charger.
• QI charger that you want to upgrade to Magsafe/Qi 2.

Backstory (Rant)

I found it frustrating that I couldn't consistently align my iPhone with the sweet spot on my IKEA NYMÅNE's Qi charger…. So, I had the brilliant idea of adding a Magsafe compatible ring to put onto the charger. 

When I googled it, I was pleasantly surprised that other people wanted to do the same thing, but there were some issues.

1. There wasn't an off-the-shelf solution

• This was rather surprising. Feels like there should be a whole market for making Qi chargers Magsafe or Qi 2 compatible.
• The product simply doesn't exist or there aren't any products marketed for this.

2. I tried a few adapters online

• On the surface level, “Magsafe Wall Mount” listings were super promising. Unfortunately, the ones I tried kept on tripping the metal detection failsafe on my Qi charger.
• I also tried an o-shape Magsafe ring but turned out despite only being a thin sheet of metal, it also tripped the metal detection as it is a closed loop!

After much internet surfing and tinkering, I found that c-shape rings were the solution as they worked well with Magsafe and due to the opening, doesn't trip the metal detection of Qi wireless chargers.

The final problem I had to overcome is the camera bump on my iPhone. I couldn't simply stick the ring on the charger as my camera bump would create enough of a distance that there wouldn't be any magnetic force at all when placing my phone down.

Hence, this 3D model was born! It's simply an extrusion of the c-shape Magsafe ring.

(Note: Admittedly, it's not a perfect trace, but it's good enough for this application.)