5Ft FORINT holder. The scad dile is the base of the design, all the fillets are added later, that is in the step and stl file.

Printed with DLP printer 0.05mm resolution with supports and raft. (See on the attache picture)

Anycubic

Photon

Yes

Yes

0.05mm

100%

Base layers: 6 with 32s exposure time / layer
Transition layer: 4 layers
Exposure: 2.3s / layer
Move to 8mm.
Base movement 50mm/min
Other layer movement 180mm/min
Retract 240mm/min
Light off between layers 0.5s

Print time: 1 hours and 5 minutes