Bottle Brush Drainer
OchreFoundry5
Найти похожую с ИИ
Профиль печати(0)
Файл модели(0)
0
0
0
Опубликовано:2025-12-20 15:21:43
0
0
000Описание
Теги
Источник модели
Отзывы(0)
A small adapter to add a bottle brush drip to the high arch of our kitchen sink.
The diameter of the neck of the sink is 31mm, and the inner distance from the front to the back of the arch of the sink is 200mm.
I included the 3mf, so if any of these dimensions don't work for you, it should be straightforward enough to figure out the angle of change that you need and deform the shape appropriately.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
100%
Filament: Hatchbox PETG Bronze
Notes:
I printed with tree structure to try and minimize the contact points. Even still, without post-processing, the bottom will be unpleasant to look at, so I just pointed the unpleasant side away from the front of the sink.
The reason for the vertical orientation is to align the layer lines with the flex that will happen when snapping it on the sink, it's a very tight fit. 20mm opening on a 31mm diameter cylinder, so you don't want it snapping along layer lines.Теги
Источник модели
Оригинальная ссылка: Посмотреть детали
CC-BY