I needed some way to store Micro SD Cards for some of my retro game handhelds and nothing else really fit my requirements so I designed my own.

There are 10 slots for Micro SD cards and a space to add a label of some kind (I used a postage sticker cut down to fit). Also space for full size SD cards which I use for a couple of adapters.

There's an option for the lid without text and also 3 different tolerances between the lid and case. 

• Loose - Can be lifted via the lid but will detatch with a slight shake
• Medium - Will not detatch with shaking but still reasonably easy to pop off by holding the base and pulling on the lid
• Tight - More difficult to remove lid but will not come off accidentally. If you're planning to transport in a bag or something I would use this version although I'd still probably throw a rubber band on just to be safe

Should be an easy print I tried at 0.2mm layer height while testing and 0.16mm for final version and everything worked as expected at both