The extruder is oriented in such a way that it fits on the effector without interfering with the delta arms. From version 1.1, threads are designed to screw directly onto the hotend heatsink, eliminating the need for the hotend nut and supports when printing.

Recommended hardware

• 2 pcs M3x12 countersunk bolt, for mounting extruder
• 3 pcs M3x10 mm bolt, for mounting effector
• 3 pcs M3 washer, on top of mount
• 3 pcs M3 plastic washer, for bottom of effector
• 3 pcs M3 serrated flange nut, for bottom of effector
• 4x2 mm PTFE tube