Hanabi Box - Standing
SnappyBog22
Найти похожую с ИИ
Профиль печати(0)
Файл модели(0)
0
0
0
Опубликовано:2026-01-26 02:42:30
0
0
000Описание
Источник модели
Отзывы(0)
I got the game Hanabi, but the cards are in sleeves, therefore it doesn't fit to the original box. I've decided to create a box which is convenient to pack in my backpack when hiking and can play with my mates. My goal was to create a box which is opening at the top, I like to store things which has lower horizontal footprint. Also tried to have the weight at minimum while easily can access the cards and tokens.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Doesn't Matter
Supports:
Yes
0.2
Infill:
20%
Notes:
Print in PLA, normal support is a nice to have. Flip the top part
Post-Printing
Magnets
I used 4pc of 4x2 mm magnets (https://www.aliexpress.com/item/1005002849121641.html) which are holding quite well! The tolerance is set to 0.1 mm, so please check your clearances before printing. A gentle push is required for the magets to snap in place. No glue needed.
Источник модели
Оригинальная ссылка: Посмотреть детали
CC-BY-SA