I've updated the design of the original CPU display case set that I posted! On top of that, a new 37.5mm x 37.5mm case has been added to the set that will fit LGA77x and LGA115x CPUs from Intel. Updated design features include a size label embedded into the case itself, chamfered corners to make the lids fit better (though they're far looser now. Use tape in the meantime while I figure out a new latching method), and a new bottom handle to make opening the cases easier!

The 35mm x 35mm cases fit Socket 478 processors only as far as I've tested, while the 40mm x 40mm fit almost any modern AMD desktop CPU. The 50mm x 50mm cases fit everything ranging from Socket 5 and 7 CPUs to Socket A and 370, not counting the Slot-1/A designs that Intel and AMD used for a short time. The new 37.5mm x 37.5mm cases will fit LGA77x and LGA115x CPUs from Intel, meaning that a wide range of Intel's mainstream desktop processors will fit in this case size!

Instructions for proper dimensioning for slicing programs are given in the relevant "case notes" text files! If you feel like these cases don't protect your CPU collection well enough, there's enough room to fit a thin piece of antistatic foam on the bottom to keep the pins protected.