Mask stand specifically made for a Xiao Mask (Genshin Impact). I bought the design for the mask from another site, so I can't upload or share it here.

Mask stand:
The mask stand was made as a gift for a friend. The stand has 4 angles (0°, 15°, 30°, 45°) it can be set in. I want to put my fioles here for people who might want a mask stand for different masks. I made a template for the head so that you can change the shape yourself according to your mask you want. The design is nowhere near perfect, so note that you might run into some problems if you want to use a different mask.

All parts can be printed using the settings stated in 'Print Settings'. I recommend to make the pin, Mask_connect and Base_connect a little stronger. Also keep in mind that the stand has to be heavy enough to keep the mask and the head in place, so you might want to make the infill percentage slightly bigger there.

I might update the mask if enough people want some improvements. Just comment or message me if you run into any big problems!

For several parts supports are needed. Rafts are optional, but not necessary.

The stand is 200x150x350 (length x width x height)