This is a buttstock/buttpad for the airsoft sa80 replicas made by ICS. I've made these because i wanted to create a full black L85 for my own use. Because i couldn't find any online i want to make this publicly available for anyone to use or modify.

I designed it in a way where you do have to use it with one of those metal inserts found in original ICS buttstocks. I sacrificed an old one of mine and used it for the 3D printed one.

I hope you like it!

Prusa

i3 MK4

No

Yes

as detailed as you can go

10% or more

It would be good to add extra perimeters for a thicker wall.

Make sure to print it in the same orientation with organic supports seen in the image above.

Cleaning up the print by removing the brim and supports might be a bit tedious. As long your top contact is set correctly for a detachable support you should be alright.

After they're all taken care off you will have to take one of the metal inserts of an official ics buttstock for the l85 and install it into the 3D print.
If anyone has questions on this i might make some pictures to explain how to do this. You will still be able to insert them back into your original buttstock as long you don't wreck the soft plastic when taking out the metal insert.

I started designing the rough dimensions in tinkercad and finished it off in blender to add the details. I designed it in a way where it reuses the metal insert that's found inside the original ICS buttpad for the L85