Ё Bot BMG Aero mount
L0ftyGong
Найти похожую с ИИ
Профиль печати(0)
Файл модели(0)
0
0
0
Опубликовано:2026-04-03 02:56:16
0
0
000Описание
Источник модели
Отзывы(0)
Parts needed to mount BMG aero ( https://ali.onl/1O9s ) to ЁBot carriage with 2020 X extrusion and upside down X rail mount.
There are two versions of Bottom part - one with an option of attaching stock fan mount and another without such an option. Both of them has holes for melt in M3 nuts to attach BLTouch or similar. Standart sized BLTouch needs to be cut in order to fit in though.
To attach fans sidemounts you will need 4 DIN912 M3x10 screws and 4 M3 nuts
You can mount fans using 16mm long screws (M2.5 if I'm not mistaken) and standart nuts. I used 1 for each fan, you can use two or none.
There is a spacer for a PTFE tube to go directly to the extruder.
Enjoy
UPDATE 03.05.21
Made fan nozzles more direct. Still no supports
Print Settings
Printer:
ЁBot
Rafts:
No
Supports:
No
Infill:
100
Filament:
ABS Maker PETG
Notes:
Parts are optimized for 0.4mm nozzle and 0.2m layer height
Only bottom parts require supports (from printplate only). All ther parts can be printed without any supports.
All parts are properly oriented.
Источник модели
Оригинальная ссылка: Посмотреть детали
CC-BY