Roclette Tray Handle
Toropa
Найти похожую с ИИ
Профиль печати(0)
Файл модели(0)
0
0
0
Опубликовано:2025-12-16 09:47:16
0
0
000Описание
Теги
Источник модели
Отзывы(0)
This is a replacement tray handle the Hamilton Beach Raclette Party Grill (31602).
My family has used this Raclette grill for years and finally a couple of the plastic tray handles were left on the grill and melted, so I designed a parametric replacement in OnShape. I printed in both Inland PETG+ and with Inland Standard Resin.
Print Settings | |
|---|---|
| Printer | Prusa Mini+ |
| Rafts | No |
| Supports | Yes / Custom (reference .3mf file) |
| Resolution | 0.20mm |
| Infill | 20 |
| Perimeters | 4 |
| Filament | Inland 1.75mm Orange PETG+ |
I was able to print without supports in a vertical orientation, but you do get some less pretty overhanging issues. When I used a supports on the outside (see .3mf file) it helped a lot.
Print Settings | |
|---|---|
| Printer | AnyCubic Photon S |
| Ambient Temperature | 12 °C (54 °F) |
| Layer Thickness | 0.050mm |
| Normal Exposure | 13 seconds |
| Off Time | 5 seconds |
| Bottom Exposure | 60 seconds |
| Bottom Layers | 8 |
| Resin | Inland Standard Black |
Anycubic Photon S
I printed this a 0.050mm and it came out beautiful. I sanded with 2000-5000 grit sandpaper and the sprayed it with a clear matte spray.
Теги
Источник модели
Оригинальная ссылка: Посмотреть детали
CC-BY