Summary

This is a hydroponic pot I designed for a misting system in a 5 gallon bucket. It fits a 2" hole. A 2" hole saw would be ideal, but the lip is broad so hand-cutting also works.

The pot lip is tall to clear the height of the lid lip, so rain water won't flow into the bucket if you choose. (Silicon sealant between the pot and the lid.)

Pretty much any print settings should work. No supports needed. It took about 2 hours as a coarse (.4mm) print w/ a 200% line width (.8mm on a .4mm nozzle), ~5 hours on "normal" settings.