Zipper pull replacement using a paperclip for a strong connection to the zipper.

There are several posts inside and should fit a variety of paper clips, some bending may be required.

I used 3 M2x6 screws to hold it together.

update 11/2/17
Added a second smaller pull should work with a #1 paperclip
and a third Tiny pull, again should work with the same #1 paperclip

Update 11/25/18
Merry Christmas, I've added a glueable model, that I think works even better.
Just add a couple drops of CA glue and push it together. (once it's all attached to the garment) Enjoy!

Here's a link to the On-Shape drawing if you care to re-mix it.