Built this to mount a ‘standard’ NEMA14 round 36mm toolhead PCB to a Hemera XS. The only board that officially supports the Hemera XS is the Duet one. For anyone wanting to run Klipper with a CANBus toolboard, this was necessary. 

Print:

1. 1x toolhead mount
2. 2x 3mm spacers if using a common 5015 or 4020 fan mount that has 3mm thick flanges for the bottom two mounting holes
   1. https://www.printables.com/model/373535-revo-hemera-xs-4020-fan-duct
   2. https://www.printables.com/model/298797-hemera-xs-revo-cooling-duct

BOM:

1. Hemera XS
2. EBB36/SHT36 or similar toolhead board
3. 2x Voron spec M3 heat inserts
4. 6x M3x12 button head screws. Socket heads can be used everywhere except the bottom 2 mounts as the heads touch the solder joints just barely