🧱 Infill

Infill Density: 50–100%

Use 80–100% for heavy curtains or larger rods.

Infill Pattern: Grid or Cubic

Balanced strength in all directions.

🧱 Walls & Shells

Wall Line Count: 3–5

Wall Thickness: 1.2–2 mm

Top Layers: 5–6

Bottom Layers: 5–6

🎯 Layer Settings

Layer Height: 0.2 mm

Initial Layer Height: 0.2–0.28 mm (better bed adhesion)

🧵 Line Width

Line Width: 0.45 mm (with a 0.4 mm nozzle)

⚡ Speed

Print Speed: 40–50 mm/s

Lower speed improves layer adhesion and strength.

Wall Speed: 25–35 mm/s

Outer Wall Speed: 20–30 mm/s

Top/Bottom Speed: 25 mm/s

🧽 Ironing

Ironing: Off

🌡 Temperature

Nozzle Temperature: 200–210°C

Bed Temperature: 60°C

Increase to 215°C if layer bonding looks weak.

🌬 Cooling

Fan Speed: Start at 100%, then reduce to 50% after first few layers

Helps avoid brittle parts while maintaining detail.

🧲 Build Plate Adhesion

Adhesion Type: Brim (5–8 lines)

🔄 Orientation

Lay flat the side with the screw holes to maximize layer strength where it matters most.