I loved the idea of a divider for Ikea Ordning published here: https://www.printables.com/model/10226-divider-for-ikea-ordning-utensils-holder. But then one day I needed a thing like that for a non-Ikea drainer… So I've designed one myself in Fusion 360 and made it fully parametric.

Please note that attached STLs will not fit the Ikea Ordning! But you can use the source file to fit this model to any drainer you have!

Parameters in the source file:

• height - the total height of the drainer (in mm)
• radius - the radius of the drainer (in mm)
• partsNo - the numer of divisions
• edge - the width of the edge that will cover the drainer's edge (in mm)
• core - the diameter of the core of the divider (in mm)
• hole_diameter - the diameter of holes in the divider (in mm)
• holes_margin_bottom - the amount of space left between holes and the bottom of the drainer (in mm)
• holes_margin_side - the amount of space left between the side of the divider and the holes (in mm)
• base_thickness - the base unit for thickness of the whole part. Walls will be 2 times base_thickness by default, it will also control some other places in the model
• pin_h / pin_d - the size of the pin at the bottom of the divider (to fit a hole in the bottom of the drainer)