Hi everyone,

I have prepared for you a relay socket from 2 printed components.

If you are engineer and working with electronics you will need this relay socket.

This relay socket it's compatible with "Finder" 5 pins relays.

Printing specification:

• Optimal printing parameters.
• Supports not necessary.
• Layer high 0.2mm
• Print time 54 min.

    Recomanded materials: 

• PETG
• PLA

Necessary materials for relay-socket:

1. Drowned head screw M2x10mm →Qty-3
2. Standard hex-nut M2 →Qty-3
3. Female contact-crimped type-MTE-C-R - ADAM TECH →Qty-5
4. Finder relay 34.51.7.024.0010

Please follow the assembly instruction bellow:

1. With screw driver insert in part “Relay-Socket-1.stl” the female contacts and hex nut.

“Female contact” see in picture bellow:

      2. Use 0.2-0.3 mm wire for soldering “female contacts” see picture bellow:

      3. Put together part “Relay-Socket-1.stl” and “Relay-Socket-2.stl” see in picture bellow:

       4. Insert screws in “Relay-Socket-2.stl” and screw in with a screwdriver.

Everything is ready, all you have to do is insert the relay into the socket.

See a picture from my work where I used this relay socket.

I hope was useful for you, happy printing.