-It's the third hand you need when holding a tool in an arbor press. I used to mill these out of aluminum or steel but material doesn't matter so long as the top of the socket head cap screw holding the tooling is seated against the ram.

-This on is designed to fit a standard 1-1/4" square ram; scale down for smaller rams. Bottom hole will take M5 or #10 socket head cap screws. Side holes can be tapped M5 or #10. You'll have to make your own tooling out of aluminum or steel.

-There are two designs; pick your favorite and go for it.

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

.2

Infill:

Filament: Solutec PLA any

Category: DIY