Very simple and small wall mount bracket for PS4 Pro. Uses a different principle from all other wall mounts I have seen. These brackets rely on the mounting screws for strength. The hooks are 5 mm deep/long, so cooling vents are not blocked.

Designed for M3.5x35 screws. Use longer screws/bolts (and metallic washers) for more strength, assuming there isn't anything behing the wall. Bigger diameter screws/bolts do not fit in this design. Use PS4BracketM4.stl for M4 screws, PS4BracketM4.5.stl for M4.5 screws, or PS4BracketM5.stl for M5 screws.

4 brackets (2 bottom, 2 top) is the basic configuration, but feel free to add more (especially below) for more strength.

Anycubic 4max Pro

No

Yes

0.2

20

Bottom/Wall/Top Line Count 4.
Used supports touching build plate, but probably doesn't matter.
Print the brackets on their side so the hooks have maximum horizontal strength.