Super sleek and minimalist coaster set. Prints in two parts and I would recommend printing them using separate filament. In my case, I used PLA Marble for the holder and PLA+ Gray for the coasters. 

IMPORTANT NOTE: Make sure you scale both models down to 75% (when designing it, I was a little too generous with the dimensions, lol)

Print settings I used:

• Layer height: 0.1mm
• Infill: 20%, Cubic
• Support: None
• Brim: None
• Printer: AnkerMake M5C, 0.4mm nozzle 
• Filament: PLA Marble and PLA+ Gray