LED Holder for printermods.com Hot End Kit
Franklin Thompson
Найти похожую с ИИ
Профиль печати(0)
Файл модели(0)
0
0
0
Опубликовано:2022-02-13 13:15:06
0
0
000Описание
Источник модели
Отзывы(0)
Summary
I wanted to make a non permanent installation of my PrinterMods.com LED hot end light kit. From a previous experience ripping the coating off an Arduino circuit board with 3M adhesive I knew better than to just attach it directly. I made this little holder for the LED's - simply print and install with 3M double sided tape or a cut down Command strip.
Link to the LED light kit used (I have v-slot and hot end lights)
https://printermods.com/collections/led-lighting-kits
Link to the installation and review video
https://www.youtube.com/watch?v=CSMMWKmtxNc&ab_channel=MatthewFinlay
Print Settings
Printer:
Creality Ender 3 Pro
Rafts:
No
Supports:
No
Infill:
100%
Post-Printing
Final result on printed cooling shroud.
I recommend using a Command strip to attach the holder to your hot end. Cut the adhesive part down to size and leave a little bit of the pull tab material so you can still easily remove it if you ever need to.
Placement option on stock hot end cooling shroud.
Источник модели
Оригинальная ссылка: Посмотреть детали
CC BY