Pitcher and Bog Plant Pot

Plant pot for pitcher and other bog plants which like to stand in an inch of water. A one piece design of pot and water tray. It is best to spray-paint your pot as it may leak between the print layers.

This is a large print 255mm x 155mm x 170mm high but should scale successfully to other sizes.

The corrugated design is to reduce warping and cracking in ABS but I recommend that you use PLA or PETG which has better layer adhesion and reduced warping.

No

No

0.25 layer height

25%

Bog plants generally do not like sunny window ledges but if you are going to put this in the sun then use a white filament to stop it getting too hot and cooking your plant..