The PiMat Timer is an all in one Rubik's cube timing device. The printed shell includes space for a Raspberry Pi, 3.5 inch touch screen, 10000mah power bank, and storage for a stylus.

This timer works similar to a stackmat timer and runs software similar to csTimer (view the software on my github, link below).

Demonstration

Here is a parts list. You will also need a soldering iron if you are building it yourself.

Link to the timing software on my github

Assembly instructions

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

.2

Infill:

Notes:

I print the main body at around 20% infill, 2 perimeter shells and 3 top and bottom layers.

It is designed to print without generated support. The main body has a few pieces of support integrated on the bottom for the nut inserts that can be clipped off after printing.

If you aren't comfortable with your printers bridging then you could use some auto generated support but I haven't found a need for this.

Category: Electronics