Wireless charger base that mounts to the IKEA SKADIS. Fits a 165mm by 90mm smartphone (Google Pixel 6 with a cover), and the Fresh ‘n Rebel Wireless Charger base. If you’ve got a larger phone, or a different charging pad, I've included the CAD files so you can tweak the parameters as you like.

Print Instructions

The Charger base can be printed as is, but I do suggest to add a small brim enforcer to the corners if you've got issues with warping and bed adhesion. The first few layers, the sides of the charger base are quite long and slim, and I noticed a bit of lift-off with mine.

While not as bad as the sides of the charger, the attachment hooks might benefit of a brim, depending on how dialed in your printer is. Mine printed without any issues on an Ender 3 v2 with 0.6mm Revo nozzle and 0.2mm layerheights.

Both the hooks and the optional decorative hexagons should be printed flat.

Customizability

If you want to make it your own, you can always print out some hexagons in different colours to spruce things up! Add a bit of CA glue, and you're set.

License

CC-0. Attribution is appreciated, but not required.

EDIT: Doggo's

Accidentally added the picture of my doggo and the one of my parents. Leaving it in because it's cute.