My very First attempt for HueForge First Generated The Logo By AI and then HueForged it.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Protopasta Black Transmission Distance: 0.5
PLA PolyLite Pro Red Transmission Distance: 1.5
PLA PolyLite Pro White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Red
At layer #10 (0.88mm) swap to White for the rest.