Replacement handle for a Ryobo table saw, or other handles mounted to shafts.

8.75mm shaft protrudes from the table saw, and this drives a screw to wind up the height of the blade.  This should suit most applications with a similar shaft size and a flattened shaft section that is within 15mm of the end of the shaft

Requires a 10mm face-face M6 bolt to be slotted in to the top of the print, and an M6 bolt of at least 30mm length to bolt it to the shaft.

No supports required, I have printed this in ABS and PETG with no issues.

Recommended infill is 20%, with 100% in the area around the nut to prevent it from cracking if overtightened.

If it's a little tight for the shaft you can print at 101% with no issues, but I found it to fit perfectly as is with a little spray of lube on the shaft :p

I haven't put much effort into cleaning up the fusion file, if anyone needs a modification to it though please feel free to ask:), feedback is welcome!

I've used the part many times since printing with no issues.