Sign with two interchangeable inserts and recessed area for company logo, sticker, etc.

Print instructions

This is an insert sign I designed for at work, I could not find anything like it on thingiverse so I designed my own.

insert-sign-body.stl or insert-sign-body.3mf

-Prints well at 0.15mm and 0.2mm, .3mf is set for PLA at 0.2mm
-Support are built into model and just need removed and cleaned up
-Note 1: The size of the header was enlarged and the photo is of the original prototype so refer to .stl or 3mf for actual size

sign-insert.stl or sign-inserts.f3d

-Add text using whatever software you prefer (I made mine 1mm deep)
-Added the Fusion360 .f3d file for easier editing
-Add a filament swap at the appropriate layer height (use contrasting colors for best visibility)
-Note 2: For the text leave enough spacing around the insert so when inserted into the sign body all text is visible
-Note 3: If centering the text, shift everything slightly to the right as the dead center of the insert is not the center when viewed through the sign's window