Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Yellow Transmission Distance: 6PLA PolyLite White Transmission Distance: 5This print uses 3 unique filaments

Swap Instructions:Start with BlackAt layer #8 (0.72mm) swap to YellowAt layer #11 (0.96mm) swap to YellowAt layer #25 (2.08mm) swap to White for the rest.