Summary

This door was designed to cover a water valve located in a wall in a garage. The door will accept a lock such as Fasmov Drawer & Cabinet Lock Cam locks with 1-1/4" Cylinder available on Amazon. I cut a coat hanger (1.9mm diameter wire) to make the hinge wire.

Door opening is 134mmx134mm. Frame has 4 screw holes for mounting. Frame2.stl has a 5mm deeper insert which will require bending the blade on the lock to 'S' shape to clear.

It was printed using Atomic Filament Gun Metal Gray PLA at 210C/Bed at 60C. Printed with frame face on the bed with support bed only.