Wall Mounted Hanging Plant Hook
Rhonda Amy
Найти похожую с ИИ
Профиль печати(0)
Файл модели(0)
3
4
0
Опубликовано:2025-12-12 06:44:28
0
1
340Описание
Источник модели
Отзывы(0)
A wall mounted hook for hanging plants! Topology optimized for minimal material usage. The object itself is approximately 210 x 210 mm which technically can fit inside a 220 x 220 build plate, however my printer is a bit janky and I kept running into issues. 90% scale seems to fit better and should still be able to accommodate the screws I intend on using.
The two screw holes are for countersunk wood screws, and the 100% scale hole dimensions are listed in one of the uploaded photos of the part drawing.
Fusion 360 file is also available if you'd like to modify it.
Print Settings
Printer:
Tronxy X3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.24
Infill:
10%
Filament:
Meterk PLAWhite
Notes:
I went with a large layer height of 0.24 mm but anything reasonable will work. Most important setting is probably a larger number of walls such as 4 or even 5, this matters more than increasing infill. Gyroid infill probably offers the most strength so I went with that, 10% should be fine. Print flat for best strength in the intended orientation.
Источник модели
Оригинальная ссылка: Посмотреть детали
CC-BY