fidget spinner
CurlyCharm3
Найти похожую с ИИ
Профиль печати(0)
Файл модели(0)
0
0
0
Опубликовано:2026-01-27 04:21:29
1
0
000Описание
Теги
Источник модели
Отзывы(0)
Based on a very classic simple design. Requires four skate board bearings. One for the centre and three for the outside. The bearing should be a tight fit, they are on my printer so good luck with it. 608ZZ for the bearings you can get them on ebay etc.. With a cat head finger protection clip!
Print instructions
Category: 3D Printing Summary
Based on a very classic simple design. Requires four skate board bearings. One for the centre and three for the outside. The bearing should be a tight fit, they are on my printer so good luck with it. 608ZZ for the bearings you can get them on ebay etc.. With a cat head finger protection clip!
Теги
Источник модели
Оригинальная ссылка: Посмотреть детали
CC-BY