This is an aid for blister packed medication. Lot of medication is packed in blisters, some are very strong and difficult to handle for people with hand disability's.

Can be printed in PLA, PETG, ABS. The Wing and base files are for SLA, SLS printing.
Use support only from the platform.
Layer height from 0.1 tot 0.3 mm Nozzle .35 mm or bigger.
After printing remove the support.
Put it together.
Click the cup on.
Ready for use.
For smaller blisters you can size it down to 84% from the original size.

Felix Tec 4.1

No

Yes

150 micron

40%

Use only support from the build platform