You will need

•  5 pet bottle
• 4 x screw M5x12 or M5x14
• 4 x nut M5
• handle

Cut the bottles into a string. I used some printed bottle cutter downloaded from Thingiverse.
	Wrap the string around your fingers about 4 times maybe 5 times
Pass the string through the lower part.
	Pass the peg through the string loop. Slide into the base.
Pull the string down and turn the peg to secure.
	Cut
Insert nut M5 from inside the cover and slide the cover on
	Screw the handle holder to the cover - use M5x12 or M5x14 screws