How it started: I wanted to make a case for my Raspberry PI 3 that fits my needs, that also can be easily modified in the future.

BOM:

• 8 x 3mm hex screws(length: 8mm)
• 8 x 3mm nut inserts M3x5x5mm(I got them from here: https://www.aliexpress.com/item/32818101417.html?spm=a2g0s.9042311.0.0.2b254c4d5iyV0e)

24/08/2019: The version currently uploaded is for VESA75 mount with active cooling with a 30mm fan(12v fan runned at 5v to be really silent).

I'm using this case for 8 months now, didn't had any overheating problem with my raspberry(it run 24/7 in this time).

01/09/2019: Added the VESA75 passive cooling case. Added BOM

24/05/2020: Added VESA100 support + small fixes for both VESA versions

Problem fixed: Not enough room above the SD card slot <- Increased the room above the SD card slot.

• VESA top compatible with new versions of VESA bottom(V1.1)

New Versions:

• VESA75 bottom: v1.1
• VESA100 bottom: v1.1

You can print it in any material!

Feedback is welcome!

Print Settings

Printer:

Custom frame made by me

Rafts:

Supports:

No

Resolution:

Infill:

25%

Filament:

any any

any

Category: DIY