The Model is 200x200mm in size. You can adjust the X and Y but Z must remain the same.

 You may print at higher layer heights below the Min Depth of 0.48mm

 Actual Depth is 2.3mm

Filaments Used:

BambuLab Basic Black Transmission Distance: 0.3

BambuLab Basic Blue Gray Transmission Distance: 2.5

BambuLab Basic Gray Transmission Distance: 3

BambuLab Basic White Transmission Distance: 6

This print uses 4 unique filaments but you can substitute as needed.

Swap Instructions:

Start with Black

At layer #8 (0.72mm) swap to Blue Gray

At layer #13 (1.12mm) swap to Gray

At layer #19 (1.6mm) swap to White for the rest.