Variations of stands for the Streamdeck XL in a similar form factor to the original. The 'real' item here is the stand with the Pi Case embedded. This project is intended for use with https://bitfocus.io/companion/

The magnets I used were 5mm x 2mm disc magnets. Place them on the streamdeck to get the correct orientation and then mark which way side needs to go down.

Magnets: https://www.amazon.com/dp/B07FZ5YZPT

Short USB-C: https://www.amazon.com/dp/B07HQHL6ZK

Monoprice

Maker Select

No

Yes

200

40

The orientation of the supports matters, the arm will print badly if the supports aren't perpendicular to the arm. Grid might work as well, I uploaded a screenshot of what worked for me.