The frame pieces are held to the table using a nail gun. The frames will fit together in opposite corners.( Bottom left = Top Right) (Bottom right = Top left).
Carefully cut a hole in the plexi glass and super glue the inserts in for the cords to go thru.
I used a sawzall to cut the hole up top for the filament to go thru. then super glue the inserts in.

Whats needed :

-pvc pipe to snap into spool holder
-6x Window bracket BL
-6x Window bracket BR
-2x Hole outside
-2x Hole inside
-1x Top insert
-1x Bottom insert
-2x lack tables - https://www.amazon.com/DHP-Parsons-Modern-Table-Black/dp/B005QLJL26/ref=sr_1_1?ie=UTF8&qid=1525667643&sr=8-1&keywords=lack+table
-2x Spool holder - https://www.thingiverse.com/thing:2481576
-1x Filament guide - https://www.thingiverse.com/thing:1940114

The plexi glass sizes varies there is enough extra space in the frames to use whatever you have laying around.
I will be designing a door later. Some updates may come as i add to and change this design. If you have any recommendations please tell me!

Prusa

i3 MK3

No